Sand, Base & Paver Calculators

Paver Calculator

How many pavers you need for a patio, path or driveway – any paver size, with the joint width, waste for cuts, pallets, weight and cost.

  • Any paver size
  • Waste & pallets
  • Free, no sign-up
Paver Calculator
%
Add 5% for straight-edged patios and 10–15% for curves, circles or herringbone patterns, which need more cuts. Pavers are usually sold by the pallet or by the square foot, not individually.
stonegravelcalculator.com
Paver count · patio estimate
Paver size–
Area0 sq ft
Joint–
0pavers
0 without waste
Per paver–
Pavers per 100 sq ft–
Approx. weight–
Pallets0 ×
Est. cost–
Add a price for a cost estimate
How this was calculated
Estimate only. Pavers per pallet and pallet coverage vary by manufacturer – check the spec sheet.
On this page

    Counting pavers sounds easy – area divided by paver size – until you remember the joints, the cuts along every edge and the pallet quantities the yard actually sells. A 6 × 9 paver covers 0.375 sq ft on paper but 0.388 sq ft once its 1/8″ joints are included, which is 3% fewer pavers; the cuts then add 5–15% back. This calculator does the sums for standard sizes (4×8, 6×6, 6×9, 8×8, 12×12, 12×24, 16×16, 18×18, 24×24) or any custom size, adds your waste percentage, and estimates pallets, weight and cost. For the base and bedding sand underneath, see the paver base calculator.

    How to use the paver calculator

    1. Measure the area

      Length × width in feet for a rectangle, or the diameter for a circle. Split an L-shape or a patio-plus-path into rectangles and add them.

    2. Pick the paver size and joint

      Choose from the list or enter length × width in inches for a custom slab. Most concrete pavers have spacer nibs giving 1/8″ joints; tumbled pavers 1/4″; set “tight” for butt-jointed porcelain or large slabs.

    3. Set thickness and waste

      Thickness is for the weight estimate (2 3/8″ / 60 mm patio, 3 1/8″ / 80 mm driveway). Waste: 5% for a simple rectangle in a running bond, 10% for herringbone or 45° patterns, 15% for curves and circles.

    4. Read pavers, pallets and cost

      The ticket shows the paver count with waste, pavers per 100 sq ft, pallets (set your pallet’s coverage), weight in tons – pavers are heavy – and cost per paver or per square foot plus delivery and installation.

    Paver formula

    Sq ft per paver = (L + joint) × (W + joint) ÷ 144
    Pavers = Area (sq ft) ÷ sq ft per paver × (1 + waste %)

    Example: 12 × 16 ft patio, 6 × 9 pavers, 1/8″ joints, 5% waste

    1. Area = 12 × 16 = 192 sq ft
    2. Per paver = (6.125 × 9.125) ÷ 144 = 0.388 sq ft
    3. 192 ÷ 0.388 = 495 pavers; + 5% = 520 pavers
    4. Weight ≈ 520 × 6 × 9 × 2.375 ÷ 1,728 × 140 lb/ft³ = 5,400 lb (2.7 tons) – about 1.6 pallets at 120 sq ft per pallet

    How many pavers per square foot?

    Paver sizePavers per sq ft (1/8″ joints)Pavers per 100 sq ftSq ft per paverTypical pallet
    4 × 8 (Holland / brick)4.304300.233480–540 pcs · 105–120 sq ft
    6 × 63.843840.261≈400 pcs · 100 sq ft
    6 × 92.582580.388≈300 pcs · 115 sq ft
    8 × 82.182180.458≈240 pcs · 110 sq ft
    12 × 120.98981.021≈100 pcs · 100 sq ft
    12 × 240.49492.031≈50 pcs · 100 sq ft
    16 × 160.55551.806≈60 pcs · 105 sq ft
    18 × 180.44442.281≈44 pcs · 100 sq ft
    24 × 240.25254.042≈24–30 pcs · 96–120 sq ft

    Before waste. With tight joints a 4 × 8 is exactly 4.5 per sq ft, a 6 × 9 is 2.67, a 12 × 12 is 1.0. Pallet counts vary by manufacturer – check the spec sheet.

    How much waste to add for cuts

    LayoutWasteWhy
    Rectangle, running bond or stack bond, square to the house5%Cuts only along two edges
    Rectangle with a border (soldier course)5–8%Border pieces plus field cuts against it
    Herringbone (90°)8–10%Half-pavers along every edge
    Herringbone or running bond at 45°10–15%Triangular offcuts at all edges
    Curves, circles, kidney shapes15%Every edge paver is cut
    Large slabs (24 × 24) on a fixed grid5–10%Few cuts but each wasted slab is 4 sq ft

    Also keep a few spare pavers (one or two per 100 sq ft) from the same dye lot for future repairs – colours change between production runs.

    How much do pavers weigh?

    Concrete pavers weigh about 140 lb per cubic foot, which works out at roughly 27 lb per square foot of 2 3/8″ (60 mm) pavers and 36 lb per sq ft of 3 1/8″ (80 mm) driveway pavers. A full pallet is 2,500–3,500 lb – too heavy for a half-ton pickup and the reason pavers are delivered by a truck with a forklift. The 192 sq ft example above weighs about 2.7 tons; a 400 sq ft patio about 5.4 tons. Natural stone varies: bluestone and granite around 160–170 lb/ft³, travertine 140–150, porcelain 2 cm slabs about 10 lb per sq ft.

    Paver cost

    Paver typeMaterial per sq ftInstalled per sq ft
    Standard concrete pavers (4×8, 6×9)$2–$5$10–$20
    Premium / tumbled / large-format concrete$5–$10$15–$30
    Clay brick pavers$4–$10$15–$30
    Porcelain 24 × 24 slabs$6–$15$20–$40
    Natural stone (bluestone, travertine, granite)$8–$25$25–$50

    Material is a third to half of an installed job; the rest is excavation, 4–6″ of compacted base, bedding sand, edge restraint, joint sand and labor. Enter a price per paver or per square foot plus the installer’s rate to see the total.

    Frequently asked questions

    How many pavers do I need for a 10 × 10 patio?

    For 100 sq ft with 1/8″ joints: 258 of 6 × 9 pavers, 430 of 4 × 8, 98 of 12 × 12 or 25 of 24 × 24 – plus 5–10% for cuts, so buy about 272 of the 6 × 9.

    How many 12×12 pavers for 100 square feet?

    98 pavers with 1/8″ joints (100 with tight joints); buy 105 to allow for cuts.

    How many 6×9 pavers are in a square foot?

    2.58 pavers per square foot with 1/8″ joints, or 2.67 laid tight. A 300-piece pallet covers about 115 sq ft.

    How much waste should I add for pavers?

    5% for a straight rectangle, 10% for herringbone or 45° layouts, 15% for curves and circles. Add one or two spares per 100 sq ft for repairs.

    How many pavers come on a pallet?

    Typically enough for 100–120 square feet: about 480–540 of 4 × 8, 300 of 6 × 9, 100 of 12 × 12 or 24–30 of 24 × 24. Counts vary by manufacturer and thickness; most yards sell by the full pallet with a surcharge for broken pallets.

    How much sand and gravel do I need under pavers?

    4–6″ of compacted crushed stone (8–12″ for driveways) and 1″ of concrete sand. Use the paver base calculator for both, and the polymeric sand calculator for the joints.

    Written by the Stone & Gravel Team

    We build free calculators for landscaping and construction materials. Every density and formula on this site is listed on our methodology page. Last updated October 6, 2026.