Stone Dust Calculator
Tons, cubic yards and bags of stone dust (screenings) for paver and flagstone bedding, joints, shed pads and paths – with coverage per ton and cost.
- Bedding, joints & paths
- Tons, yards & bags
- Free, no sign-up
Add a price for a cost estimate
How this was calculated
On this page
Stone dust – also called screenings, quarry dust, crusher dust, grit, #10 or decomposed granite fines – is the powder and tiny chips left after crushed stone is screened. It packs hard, levels easily and locks flagstone and pavers in place, which is why it is the traditional bedding layer in the Northeast and the standard joint filler for dry-laid flagstone. It is sold by the ton in bulk and in 50 lb or 0.5 cu ft bags. This calculator gives you both, for bedding, joints or a full path base.
How to use the stone dust calculator
- Measure the area
Length × width in feet for a patio or path, or the diameter for a round seating area. Add a second area for a connecting walkway.
- Choose the depth
1″ for a bedding layer under pavers or flagstone, 1/2–1″ to fill joints between flagstones, 2″ for a leveling layer on a shed pad, 4″ for a compacted path or dog run.
- Pick the type
Limestone screenings are the default (100 lb/ft³). Granite dust and bluestone dust are slightly heavier; damp stone dust as delivered from the quarry can weigh 15% more.
- Read tons, yards and bags
Bulk is sold by the ton or yard; bags by 50 lb or 0.5 cu ft. The 10% allowance covers compaction and the dust that blows away while you screed.
Stone dust formula
Cubic feet = Length (ft) × Width (ft) × Depth (in) ÷ 12Tons = cubic feet × 100 lb ÷ 2,000 · 50 lb bags = cubic feet × 2
Example: 12 × 12 ft flagstone patio, 1 inch of stone dust bedding
- Area = 12 × 12 = 144 sq ft
- Volume = 144 × 1 ÷ 12 = 12 cubic feet (0.44 cubic yards)
- Weight = 12 × 100 = 1,200 lb = 0.6 tons
- Add 10% → 0.66 tons, or 27 bags of 50 lb
How much stone dust do I need? Quick reference
| Area | 1/2″ (joints) | 1″ (bedding) | 2″ (leveling) | 4″ (path base) |
|---|---|---|---|---|
| 10 × 10 (100 sq ft) | 0.21 t · 9 bags | 0.42 t · 17 bags | 0.83 t · 34 bags | 1.67 t · 1.23 yd³ |
| 12 × 12 (144 sq ft) | 0.30 t · 12 bags | 0.60 t · 24 bags | 1.20 t · 48 bags | 2.40 t · 1.78 yd³ |
| 12 × 16 (192 sq ft) | 0.40 t · 16 bags | 0.80 t · 32 bags | 1.60 t · 64 bags | 3.20 t · 2.37 yd³ |
| 20 × 20 (400 sq ft) | 0.83 t · 34 bags | 1.67 t · 67 bags | 3.33 t · 2.47 yd³ | 6.67 t · 4.94 yd³ |
| Path 50 × 4 (200 sq ft) | 0.42 t · 17 bags | 0.83 t · 34 bags | 1.67 t · 67 bags | 3.33 t · 2.47 yd³ |
Limestone stone dust at 100 lb/ft³ (1.35 tons per cubic yard); bags are 50 lb. Figures exclude the 10% allowance. Joint figures assume the whole area – for a flagstone patio with 1″ joints, the joints are only 10–15% of it, so divide by 7 or so.
Coverage per ton
One ton of stone dust covers about 240 sq ft at 1 inch, 120 sq ft at 2 inches and 60 sq ft at 4 inches. A 50 lb bag covers 6 sq ft at 1 inch.
| Material | Density | Tons per yd³ | sq ft per ton at 0.5" | sq ft per ton at 1" | sq ft per ton at 2" | sq ft per ton at 4" |
|---|---|---|---|---|---|---|
| Stone dust / screenings (limestone) | 100 lb/ft³ | 1.35 | 480 | 240 | 120 | 60 |
| Granite dust / decomposed granite | 105 lb/ft³ | 1.42 | 457 | 229 | 114 | 57 |
| Bluestone dust | 105 lb/ft³ | 1.42 | 457 | 229 | 114 | 57 |
| Quarry fines / manufactured sand | 105 lb/ft³ | 1.42 | 457 | 229 | 114 | 57 |
| Stone dust, damp (as delivered) | 115 lb/ft³ | 1.55 | 417 | 209 | 104 | 52 |
Coverage = 2,000 lb ÷ (density × depth in feet). Figures are for loose material; add 5–10% for waste and up to 20% for compacted base layers.
Stone dust weight and density
Dry limestone screenings weigh about 100 lb per cubic foot – 2,700 lb (1.35 tons) per cubic yard. Granite and bluestone dust are 105 lb/ft³; damp dust straight from the quarry pile can be 115 lb/ft³, which is why a “ton” delivered wet goes less far. A 0.5 cu ft bag weighs 45–50 lb.
| Material | lb / ft³ | lb / yd³ | US tons / yd³ | kg / m³ | tonnes / m³ |
|---|---|---|---|---|---|
| Stone dust / screenings (limestone) | 100 | 2,700 | 1.35 | 1,602 | 1.60 |
| Granite dust / decomposed granite | 105 | 2,835 | 1.42 | 1,682 | 1.68 |
| Bluestone dust | 105 | 2,835 | 1.42 | 1,682 | 1.68 |
| Quarry fines / manufactured sand | 105 | 2,835 | 1.42 | 1,682 | 1.68 |
| Stone dust, damp (as delivered) | 115 | 3,105 | 1.55 | 1,842 | 1.84 |
Stone dust vs sand for paver bedding
| Stone dust / screenings | Concrete (sharp) sand | |
|---|---|---|
| Compaction | Packs very hard – almost like weak concrete | Stays granular, drains |
| Drainage | Poor – can hold water under pavers | Good |
| Best under | Irregular flagstone, bluestone, stepping stones | Concrete pavers (ICPI standard), brick |
| Joints | Excellent – sweeps in and sets firm | Washes out; use polymeric sand instead |
| Weight | ≈1.35 t / yd³ | ≈1.35 t / yd³ |
| Cost | $15–$35 / ton bulk | $20–$45 / ton bulk |
Paver manufacturers (and the ICPI) specify sharp concrete sand, not stone dust, under interlocking concrete pavers because the fines in stone dust can trap water and heave in freeze–thaw climates. For natural flagstone with irregular thickness, stone dust is easier to level and holds the stones better. For a sand bed use the paver sand calculator; for joints between concrete pavers use the polymeric sand calculator.
Stone dust cost
Bulk stone dust is among the cheapest quarry products at $15–$35 per ton (about $20–$50 per cubic yard), plus $75–$150 delivery. Bagged, it is $4–$6 per 50 lb bag – around $160–$240 per ton – so bags only make sense for a job under about half a ton (20 bags).
Frequently asked questions
How much does a ton of stone dust cover?
About 240 square feet at 1 inch deep, 120 sq ft at 2 inches and 60 sq ft at 4 inches.
How many tons of stone dust are in a cubic yard?
About 1.35 tons (2,700 lb) dry; up to 1.55 tons damp. One ton is roughly 0.74 cubic yards or 20 cubic feet.
How many bags of stone dust do I need for 100 square feet?
At 1 inch deep, 100 sq ft is 8.3 cubic feet – about 17 bags of 50 lb (or 17 bags of 0.5 cu ft). Add two or three for waste.
How thick should stone dust be under pavers?
1 inch, screeded level, over a compacted gravel base. Never use stone dust to make up for a low base – anything thicker than 1.5″ will settle unevenly.
Is stone dust the same as decomposed granite?
Close relatives. Decomposed granite (DG) is naturally weathered granite with a similar fines-and-grit gradation; stone dust is manufactured by crushing. Both compact hard and are used for paths and bedding. DG is more common in the West, stone dust in the East.
Can I use stone dust for a path?
Yes – 2–4 inches compacted over a gravel base makes a firm, natural-looking path. Crown it slightly so water runs off, and expect to top it up every few years. Use the 4″ depth in the calculator for a new path.