Sand, Base & Paver Calculators

Sharp Sand Calculator

How much sharp sand you need in tonnes, bulk bags and 25 kg bags – for slab beds, screeds, artificial grass bases and lawn top dressing. Metric: square metres and millimetres.

  • Tonnes & bulk bags
  • Metric (m² & mm)
  • Free, no sign-up
Sharp Sand Calculator
Density: kg/m³
%
A bulk bag of sharp sand (about 850 kg) covers roughly 10 m² at 50 mm. Use sharp sand for screeds, slab bedding and concrete; use soft (building) sand for mortar.
stonegravelcalculator.com
Sand estimate · tonnes & bulk bags
Material–
Area0 m²
Depth–
0tonnes
0 cubic metres
Volume0
Weight0
Bags0 ×
Est. cost–
Add a price for a cost estimate
How this was calculated
Estimate only. Densities are typical loose values – confirm with your supplier.
On this page

    Sharp sand (grit sand, concreting sand) is the coarse, angular sand used in the UK for laying paving slabs, floor screeds, concrete and as a base for artificial grass – anywhere you need a bed that compacts and drains rather than one that stays plastic like soft building sand. It is sold loose by the tonne, in bulk bags of roughly 850 kg (sometimes labelled “tonne bags” though few actually hold a tonne) and in 25 kg bags. This calculator works in square metres and millimetres and gives you tonnes, bulk bags and small bags, using a loose density of about 1.6 t/m³ (more when damp).

    How to use the sharp sand calculator

    1. Measure the area in metres

      Length × width in metres, or the diameter for a circular patio. Add a second area for a path or step.

    2. Set the depth in millimetres

      25–30 mm for a bedding layer under slabs on a full mortar bed (the sand is mixed with cement – see the sand & cement calculator), 50 mm for a dry sharp-sand bed under block paving or slabs, 50–75 mm for a screed, 25 mm for an artificial grass laying course, 10–15 mm for lawn top dressing.

    3. Choose the sand

      Sharp sand is the default. Damp sand as delivered weighs about 15% more – choose it if your merchant sells by weight and the sand is wet. Building (soft) sand, kiln-dried, plastering and play sand are included for comparison.

    4. Read tonnes and bags

      Tonnes, cubic metres, bulk bags and 25 kg bags, with cost once you add a price per bulk bag or per tonne. The 10% allowance covers compaction and the sand lost to the sub-base.

    Sharp sand formula

    Cubic metres = Area (m²) × depth (mm) ÷ 1,000
    Tonnes = m³ × 1.6  ·  Bulk bags = tonnes ÷ 0.85  ·  25 kg bags = tonnes × 40

    Example: 5 × 4 m patio, 50 mm dry sand bed

    1. Area = 5 × 4 = 20 m²
    2. Volume = 20 × 50 ÷ 1,000 = 1.0 m³
    3. Weight = 1.0 × 1.6 = 1.6 tonnes; + 10% = 1.76 tonnes
    4. = just over 2 bulk bags (order 2 plus a few 25 kg bags, or 3 to be safe), or 71 × 25 kg bags

    How much sharp sand do I need? Quick reference

    Area25 mm50 mm75 mm
    5 m²0.20 t · ¼ bulk bag · 8 × 25 kg0.40 t · ½ bulk bag · 16 × 25 kg0.60 t · ¾ bulk bag · 24 × 25 kg
    10 m²0.40 t · ½ bulk bag0.80 t · 1 bulk bag1.20 t · 1½ bulk bags
    20 m²0.80 t · 1 bulk bag1.60 t · 2 bulk bags2.40 t · 3 bulk bags
    30 m²1.20 t · 1½ bulk bags2.40 t · 3 bulk bags3.60 t · 4¼ bulk bags
    50 m²2.00 t · 2½ bulk bags4.00 t · 4¾ bulk bags6.00 t · 7 bulk bags

    Sharp sand at 1.6 t/m³, bulk bags of 850 kg, before the 10% allowance. Rule of thumb: one bulk bag covers about 10 m² at 50 mm (21 m² at 25 mm, 7 m² at 75 mm).

    Coverage per bulk bag and 25 kg bag

    MaterialDensitym² per tonne at 25 mmm² per bulk bagm² per tonne at 50 mmm² per bulk bagm² per tonne at 75 mmm² per bulk bag
    Sharp sand (grit sand), loose1.60 t/m³25.021.212.510.68.37.1
    Sharp sand, damp (as delivered)1.84 t/m³21.718.510.99.27.26.2
    Building / soft sand1.60 t/m³25.021.212.510.68.37.1
    Kiln-dried sand (jointing)1.52 t/m³26.322.313.111.28.87.4
    Plastering sand1.60 t/m³25.021.212.510.68.37.1
    Play sand1.52 t/m³26.322.313.111.28.87.4

    Coverage = 1,000 kg ÷ (density × depth in metres); bulk bag taken as 850 kg. Loose material – add 10% for waste and 20% for compacted sub-base.

    Sharp sand vs building sand vs kiln-dried sand

    SandGrainUse forNot for
    Sharp sand (grit / concreting)Coarse, angularSlab and block paving beds, screeds, concrete, rendering scratch coats, artificial grass base, lawn dressingBricklaying mortar (too harsh)
    Building sand (soft / bricklaying)Fine, roundedMortar for brick and block, pointing, render top coatsUnder paving – it holds water and never firms up
    Kiln-dried sandVery fine, dryBrushing into block-paving jointsBedding
    Plastering sandFine, washedInternal plaster and render finish coatsPaving
    Play sandFine, washed, roundedSandpitsConstruction
    Ballast (sand + gravel)Mixed to 20 mmConcrete for footings and basesBedding or mortar

    How much does sharp sand weigh?

    Loose, dry sharp sand weighs about 1,600 kg per cubic metre (1.6 t/m³); damp sand straight off the lorry can be 1,750–1,850 kg/m³. A bulk bag holds about 0.5 m³ and weighs 800–900 kg; a 25 kg bag is roughly 15–16 litres. So a bulk bag is about 34 small bags – and at typical prices the bulk bag costs less than half as much per tonne.

    Materiallb / ft³lb / yd³US tons / yd³kg / m³tonnes / m³
    Sharp sand (grit sand), loose1002,7001.351,6021.60
    Sharp sand, damp (as delivered)1153,1051.551,8421.84
    Building / soft sand1002,7001.351,6021.60
    Kiln-dried sand (jointing)952,5651.281,5221.52
    Plastering sand1002,7001.351,6021.60
    Play sand952,5651.281,5221.52

    Sharp sand cost (UK)

    A bulk bag of sharp sand costs about £45–£75 delivered from a builders’ merchant or online aggregate supplier (£55–£90 per tonne loose, with a delivery charge of £20–£50 unless you order several bags). 25 kg bags are £2.50–£5 each – £100–£200 per tonne – so for anything over about half a tonne (20 bags) the bulk bag wins even with delivery.

    Frequently asked questions

    How many square metres does a bulk bag of sharp sand cover?

    About 10 m² at 50 mm deep, 21 m² at 25 mm or 7 m² at 75 mm, for an 850 kg bag (0.53 m³).

    How much sharp sand do I need for 10 square metres of slabs?

    For a 50 mm dry sand bed, about 0.5 m³ – 0.8 tonnes, one bulk bag. For a 30 mm mortar bed you need about 0.3 m³ of sharp sand plus cement at 4:1 or 5:1 – see the sand & cement calculator.

    How many 25 kg bags of sharp sand are in a bulk bag?

    About 34 for an 850 kg bulk bag (40 if the bag really holds a tonne).

    How much does 1 m³ of sharp sand weigh?

    About 1.6 tonnes dry and up to 1.85 tonnes when wet. One tonne is roughly 0.6 m³.

    Can I lay slabs on sharp sand alone?

    For light-use patios on a well-compacted MOT Type 1 sub-base, a 50 mm sharp-sand bed is common and allows slabs to be lifted later. For a permanent patio, especially with large or thin slabs, most installers use a full bed of 4:1 or 5:1 sharp sand and cement mortar, 30–40 mm thick.

    What depth of sharp sand for artificial grass?

    20–25 mm of sharp sand (or granite dust), screeded level and compacted, over 50–75 mm of compacted Type 1. 10 m² at 25 mm is 0.25 m³ – about 0.4 tonnes, half a bulk bag.

    Written by the Stone & Gravel Team

    We build free calculators for landscaping and construction materials. Every density and formula on this site is listed on our methodology page. Last updated October 6, 2026.