Gravel & Stone Calculators

2A Modified Stone Calculator

Tons and truckloads of 2A modified, 2B, 2RC, CA-6, DGA, ABC and other dense-graded base stone – by compacted depth, with the 20% compaction allowance already built in.

  • Compacted depth
  • 20% compaction included
  • Free, no sign-up
2A / 2B Modified Stone Calculator
Density: lb/ft³
%
Modified stone is ordered by compacted depth. It loses about 20% of its volume under a plate compactor, so the calculator adds 20% by default. 4" compacted for patios and walkways, 6–8" for driveways, 8–12" under slabs on soft ground.
stonegravelcalculator.com
Material estimate · weigh ticket
Material–
Area0 sq ft
Compacted depth–
0tons
0 cubic yards
Volume0
Weight0
Truckloads0 ×
Est. cost–
Add a price for a cost estimate
How this was calculated
Estimate only. Densities are typical loose values – confirm with your supplier.
On this page

    2A modified stone is the Pennsylvania name for dense-graded base aggregate: 3/4″ crushed stone blended with smaller stone and stone dust so that it compacts into a hard, stable layer. Every region has its own name for the same product – 2RC in parts of PA, DGA or QP (quarry process) in New Jersey, CA-6 in Illinois, ABC or crusher run in the Carolinas, 21A/21B in Virginia, #411 or #304 in Ohio, Class 5 in Minnesota. Whatever it is called, it is ordered by the ton and by compacted depth, and it loses about a fifth of its volume under a plate compactor. This calculator adds that back so you do not come up short on the last load.

    How to use the modified stone calculator

    1. Enter the area

      Length × width in feet for a patio, driveway, shed pad or road, or type the square footage. Add several runs for an L-shaped drive.

    2. Set the compacted depth

      4″ for patios, walkways and paver bases on firm ground, 6″ for residential driveways and shed pads, 8–12″ for driveways on clay or for anything a truck will drive on.

    3. Pick the product

      2A modified is the default (125 lb/ft³ loose). 2B is clean 3/4″ stone – it does not compact, so drop the allowance to 5% if you choose it. The other options are regional equivalents of 2A.

    4. Read tons and truckloads

      The ticket shows tons, loose cubic yards, truckloads and cost. The 20% compaction allowance is included – do not add more waste on top unless the subgrade is very soft.

    2A modified formula

    Compacted yd³ = Length (ft) × Width (ft) × Depth (in) ÷ 324
    Loose yd³ to order = compacted yd³ × 1.20  ·  Tons = loose yd³ × 1.69

    Example: 30 × 12 ft driveway, 4 inches of 2A compacted

    1. Area = 30 × 12 = 360 sq ft
    2. Compacted volume = 360 × 4 ÷ 324 = 4.44 cubic yards
    3. Loose volume = 4.44 × 1.20 = 5.33 cubic yards
    4. Weight = 5.33 × 1.69 = 9.0 tons – about half a tri-axle load

    How many tons of 2A modified do I need? Quick reference

    Area4″ compacted6″ compacted8″ compacted12″ compacted
    10 × 10 (100 sq ft)2.5 t3.75 t5.0 t7.5 t
    12 × 16 (192 sq ft)4.8 t7.2 t9.6 t14.4 t
    30 × 12 (360 sq ft)9.0 t13.5 t18.0 t27.0 t
    50 × 12 (600 sq ft)15.0 t22.5 t30.0 t45.0 t
    100 × 12 (1,200 sq ft)30.0 t45.0 t60.0 t90.0 t

    2A modified at 125 lb/ft³ loose, including the 20% compaction allowance – roughly 2.5 tons per 100 sq ft per 4 inches. A tri-axle dump truck carries 20–22 tons.

    Coverage per ton

    Before compaction a ton of 2A covers about 48 sq ft at 4 inches; after compaction that same ton covers only about 40 sq ft at 4 inches (27 sq ft at 6″, 20 sq ft at 8″). Suppliers often quote “a ton covers 80 sq ft at 2 inches compacted” – the same figure.

    MaterialDensityTons per yd³sq ft per ton at 4"sq ft per ton at 6"sq ft per ton at 8"sq ft per ton at 12"
    2A modified (3/4" minus with fines – PA/NJ/MD)125 lb/ft³1.6948322416
    2B clean stone (3/4", no fines)105 lb/ft³1.4257382919
    2RC / 2RC modified (Pennsylvania)120 lb/ft³1.6250332517
    3A modified (1.5" minus)125 lb/ft³1.6948322416
    CA-6 / road base (Illinois)125 lb/ft³1.6948322416
    DGA / QP – dense graded aggregate (NJ)125 lb/ft³1.6948322416
    ABC / crusher run (Carolinas)125 lb/ft³1.6948322416
    21A / 21B (Virginia)125 lb/ft³1.6948322416

    Coverage = 2,000 lb ÷ (density × depth in feet). Figures are for loose material; add 5–10% for waste and up to 20% for compacted base layers.

    2A vs 2B vs 2RC vs 3A

    ProductWhat it isCompacts?Use
    2A modified3/4″ minus with fines (PennDOT 2A)Yes – 20%Paver base, driveways, shed pads, under slabs, road base
    2B3/4″ clean, no fines (= #57)NoDrainage, French drains, driveway top course, pipe bedding
    2RC2A with a wider, coarser range (up to 2″)Yes – 20%Thick driveway bases, farm lanes, rough fill
    3A modified1.5″–2″ minus with finesYes – 20%Deep bases on soft ground, haul roads
    #10 / screeningsStone dustYesPaver bedding, leveling, joints

    Regional names for the same base stone

    NameWhereDensity (loose)
    2A modified, 2RCPennsylvania, Maryland, Delaware≈125 lb/ft³ · 1.69 t/yd³
    DGA, QP (quarry process), 3/4″ blendNew Jersey, New York≈125 lb/ft³
    CA-6, grade 8, road packIllinois, Wisconsin, Indiana≈125 lb/ft³
    #411, #304Ohio, Kentucky≈125 lb/ft³
    ABC, crusher run, CR-6Carolinas, Georgia, Maryland≈125 lb/ft³
    21A, 21B, VDOT baseVirginia≈125 lb/ft³
    Class 5, Class 2 base, road baseMinnesota, Colorado, California≈120–130 lb/ft³

    How deep should modified stone be?

    • Paver patio or walkway – 4″ compacted on firm, well-drained soil; 6″ on clay. Compact in 2″ lifts. Then 1″ of bedding sand (see the paver base calculator).
    • Shed or hot-tub pad – 4–6″ compacted, with 2″ of stone dust or clean stone on top to level.
    • Residential driveway – 6–8″ compacted; 8–12″ on soft ground or where a delivery truck will turn. Finish with 2–3″ of clean stone if you want a loose surface.
    • Under a concrete slab – 4–6″ compacted; use clean #57 / 2B if drainage matters more than bearing.

    2A modified stone cost

    2A modified sells for about $20–$40 per ton at Pennsylvania and Mid-Atlantic quarries – it is one of the cheapest products a quarry makes because nothing is screened out. Delivery adds $75–$150 per load. That puts a 4″ compacted base for a 12 × 16 patio (about 5 tons) at $100–$200 for material plus delivery.

    Frequently asked questions

    How many tons of 2A modified are in a cubic yard?

    About 1.7 tons per loose cubic yard (125 lb/ft³, 3,375 lb). After compaction the same stone is about 2.0–2.1 tons per compacted yard.

    How much does a ton of 2A modified cover?

    At 4 inches compacted, one ton covers about 40 square feet; at 2 inches about 80 sq ft; at 6 inches about 27 sq ft.

    How much does 2A compact?

    Roughly 20% under a plate compactor or roller – 5 inches loose becomes 4 inches compacted. The calculator orders loose stone to reach your compacted depth, so enter the finished depth you want.

    What is the difference between 2A and 2B stone?

    2A is modified – 3/4″ stone with fines that compacts hard. 2B is clean 3/4″ stone (the same as #57) with no fines – it drains well but never compacts. Use 2A for bases and 2B for drainage.

    Is 2A modified the same as crusher run?

    Functionally yes. Crusher run, ABC, DGA, QP, CA-6, #411 and 2A are all dense-graded 3/4″ (or 1″) minus base stone; the names change by state and quarry. Densities are all close to 125 lb/ft³ loose.

    Can I use 2A modified as a driveway surface?

    Yes – compacted 2A makes a hard, nearly dust-free surface that sheds water. It will develop a dusty top layer and can rut if it stays wet, so many people cap it with 2–3″ of clean #57 or use it as the base only.

    Written by the Stone & Gravel Team

    We build free calculators for landscaping and construction materials. Every density and formula on this site is listed on our methodology page. Last updated October 6, 2026.