Weight Converters & Charts

Stone & Gravel Weight Calculator

Enter any volume – a truck bed, a pile, a dumpster, a yard order – and get its weight in pounds, US tons, kilograms and tonnes for gravel, crushed stone, sand, soil and solid rock.

  • 25+ materials
  • Tons, lb, kg & tonnes
  • Free, no sign-up
Stone & Gravel Weight Calculator
Density:
Enter any volume – a truck bed, a pile, a dumpster or a yard order – and get the weight. Switch the density unit if your supplier quotes tons per yard.
stonegravelcalculator.com
Weight estimate
Material–
Volume–
Density–
0tons
0 lb
Kilograms–
Tonnes–
Tons per yd³–
Truckloads0 ×
How this was calculated
Estimate only. Loose materials vary ±10% with moisture and grading; solid rock figures are for the stone itself, not a stacked pile.
On this page

    Stone is bought by volume and delivered by weight, hauled in trucks with weight limits and dumped in containers with weight limits – so you constantly need to turn cubic yards into tons and back. The answer depends on the material: a cubic yard of pea gravel weighs about 1.3 tons, crusher run 1.7 tons, and solid granite 2.3 tons. This calculator takes a volume in cubic yards, cubic feet, cubic metres or litres and a material (or your own density figure) and returns the weight in every unit, plus the tons-per-yard factor your supplier will quote.

    How to use the stone weight calculator

    1. Enter the volume

      Type a quantity and pick its unit – cubic yards for a supplier order, cubic feet for a truck bed or bags, cubic metres or litres for metric. For a pile, estimate length × width × average height.

    2. Choose the material

      Grouped as gravel and crushed stone, sand and soil, and solid rock and concrete. Each sets a typical loose (or solid) density; pick “custom” to type your supplier’s own figure.

    3. Switch the density unit if needed

      Enter density as lb/ft³, kg/m³ or tons per cubic yard – whichever your supplier quotes. The calculator converts between them.

    4. Read the weight

      US tons is the headline, with pounds, kilograms and metric tonnes beneath, plus how many truckloads the volume represents.

    Stone weight formula

    Weight (lb) = Volume (ft³) × density (lb/ft³)  ·  US tons = lb ÷ 2,000  ·  Tonnes = lb × 0.4536 ÷ 1,000
    Tons per cubic yard = density (lb/ft³) × 27 ÷ 2,000

    Example: how much does 3 cubic yards of 3/4″ gravel weigh?

    1. 3 yd³ × 27 = 81 cubic feet
    2. 81 × 105 lb/ft³ = 8,505 lb
    3. = 4.25 US tons = 3,858 kg = 3.86 tonnes

    Rule of thumb: 105 lb/ft³ × 27 ÷ 2,000 = 1.42 tons per cubic yard, so tons ≈ yards × 1.4 for most gravel.

    How much does a cubic yard of stone weigh? Density chart

    Loose, as-delivered densities used by this calculator. Moisture and grading move these by about ±10%; your quarry’s weigh ticket is the final word.

    Materiallb / ft³lb / yd³US tons / yd³kg / m³tonnes / m³
    Gravel, 3/4"–1" (general)1052,8351.421,6821.68
    Pea gravel962,5921.301,5381.54
    #57 crushed stone1052,8351.421,6821.68
    Crusher run / #411 / ABC1253,3751.692,0022.00
    Stone dust / screenings1002,7001.351,6021.60
    2"–3" clean stone (#3 / #4)1002,7001.351,6021.60
    River rock 1–3"1002,7001.351,6021.60
    Lava rock501,3500.688010.80
    Decomposed granite1052,8351.421,6821.68
    Rip rap (placed)1102,9701.491,7621.76
    Recycled concrete952,5651.281,5221.52
    Sand, dry1002,7001.351,6021.60
    Sand, wet1203,2401.621,9221.92
    Topsoil (moist)902,4301.221,4421.44
    Fill dirt1002,7001.351,6021.60
    Clay1102,9701.491,7621.76
    Hardwood mulch225940.303520.35
    Compost451,2150.617210.72
    Granite (solid)1684,5362.272,6912.69
    Limestone (solid)1604,3202.162,5632.56
    Sandstone (solid)1453,9151.962,3232.32
    Marble (solid)1704,5902.302,7232.72
    Slate (solid)1704,5902.302,7232.72
    Basalt / trap rock (solid)1854,9952.502,9632.96
    Concrete (cured)1504,0502.032,4032.40
    Asphalt (compacted)1453,9151.962,3232.32

    Weight of common volumes

    VolumePea gravel (96)3/4″ gravel / #57 (105)Crusher run (125)Dry sand (100)Topsoil (90)
    1 cubic foot96 lb105 lb125 lb100 lb90 lb
    0.5 cu ft bag48 lb53 lb63 lb50 lb45 lb
    5-gallon bucket (0.67 ft³)64 lb70 lb84 lb67 lb60 lb
    Wheelbarrow, 6 ft³576 lb630 lb750 lb600 lb540 lb
    1 cubic yard (27 ft³)2,592 lb · 1.30 t2,835 lb · 1.42 t3,375 lb · 1.69 t2,700 lb · 1.35 t2,430 lb · 1.22 t
    Half-ton pickup (level, ~2 yd³)2.6 t ✗2.8 t ✗3.4 t ✗2.7 t ✗2.4 t ✗
    Single-axle dump (6 yd³)7.8 t8.5 t10.1 t8.1 t7.3 t
    Tri-axle dump (14 yd³)18.1 t19.8 t23.6 t18.9 t17.0 t
    1 cubic metre1.54 tonnes1.68 tonnes2.00 tonnes1.60 tonnes1.44 tonnes

    Densities in lb/ft³ in the header. ✗ – a level pickup bed of stone exceeds the payload of a half-ton truck (typically 1,500–2,000 lb); carry about one-third of a yard (a single scoop) at a time.

    How much stone can my truck or trailer carry?

    VehicleTypical payloadGravel (1.42 t/yd³)Sand (1.35 t/yd³)Mulch (0.3 t/yd³)
    Half-ton pickup (F-150, Silverado 1500)1,500–2,000 lb½ yd³½–¾ yd³2–2.5 yd³ (bed full)
    Three-quarter-ton pickup (F-250, 2500)3,000–4,000 lb1–1.3 yd³1–1.5 yd³Bed full
    One-ton pickup / dually4,000–6,000 lb1.5–2 yd³1.5–2 yd³Bed full
    5 × 8 single-axle trailer≈2,000 lb¾ yd³¾ yd³1.5 yd³ heaped
    6 × 12 tandem trailer5,000–7,000 lb2 yd³2–2.5 yd³Full
    Single-axle dump truck8–10 tons6–7 yd³6–7 yd³Full
    Tri-axle dump truck20–22 tons14–15 yd³15–16 yd³Full

    Loose stone vs solid rock

    The chart above has two kinds of figure. Loose densities (gravel, sand, soil) include the air between particles – about 35–40% of the volume – which is why crushed granite at 105 lb/ft³ is much lighter than solid granite at 168 lb/ft³. Use the solid figures for a boulder, a slab of countertop, a flagstone pallet or a block of cut stone; use the loose figures for anything you shovel. A boulder’s volume is roughly length × width × height × 0.5–0.6 (it is not a box).

    Dumpster weight limits

    Roll-off dumpsters are rented by size but charged by weight, and stone fills them past the limit long before they look full. A 10-yard dumpster typically allows 2–3 tons – that is only about 1.5–2 cubic yards of gravel or concrete, filling it a quarter of the way. Most haulers require “clean fill” or “heavy debris” containers for stone, soil and concrete, filled only to a marked line (often 1/3 to 1/2). Enter the dumpster volume above to see the weight before you book.

    Frequently asked questions

    How much does a cubic yard of gravel weigh?

    About 2,800 lb (1.4 US tons) for 3/4″ crushed stone or #57; pea gravel around 2,600 lb (1.3 tons); crusher run with fines about 3,400 lb (1.7 tons). In metric, about 1.7 tonnes per cubic metre.

    How many tons is a cubic yard of stone?

    Between 1.2 and 1.7 US tons for loose aggregate – 1.4 is the usual figure for gravel. Solid rock is 2.2–2.5 tons per cubic yard.

    How much does a yard of sand weigh?

    Dry sand about 2,700 lb (1.35 tons); damp sand as delivered 2,900–3,200 lb (1.45–1.6 tons).

    How much does a 5-gallon bucket of gravel weigh?

    About 70 lb for 3/4″ gravel (a 5-gallon bucket is 0.67 cubic feet); 65 lb for pea gravel, 85 lb for crusher run and 67 lb for dry sand.

    How much does a scoop of gravel weigh?

    A supplier’s loader scoop is usually half a cubic yard – about 1,400 lb (0.7 tons) of gravel. Some yards use 1/3-yard or full-yard buckets; ask, because “a scoop” is what they will put in your pickup.

    How much does a cubic foot of granite weigh?

    Solid granite weighs about 168 lb per cubic foot (2,690 kg/m³). Crushed granite gravel weighs 105–110 lb/ft³ loose because of the air between the pieces.

    Written by the Stone & Gravel Team

    We build free calculators for landscaping and construction materials. Every density and formula on this site is listed on our methodology page. Last updated October 6, 2026.